10500 루멘 DLP 단단 레이저 프로젝터 디지털 3D 매핑 비머
10500 루멘 DLP 단단 레이저 프로젝터 디지털 3D 매핑 비머
10500 루멘 DLP 단단 레이저 프로젝터 디지털 3D 매핑 비머
10500 루멘 DLP 단단 레이저 프로젝터 디지털 3D 매핑 비머
10500 루멘 DLP 단단 레이저 프로젝터 디지털 3D 매핑 비머
프로젝터 모델
(0)

10500 루멘 DLP 단단 레이저 프로젝터 디지털 3D 매핑 비머

견적 요청

귀사 사양(MOQ, 판매 시장, 필요 인증, 리드타임)을 제출해 주시면 맞춤 견적을 안내해 드리겠습니다.

10500 루멘 고밝기 DLP 레이저 프로젝터입니다. 단단초점 기술로 공간 제약 없이 설치 가능. 디지털 3D 매핑 지원으로 건축물, 이벤트, 광고 사이니지에 최적. 안정적인 레이저 광원으로 장시간 사용에도 성능 유지.

10500 lumens DLP Short Throw Laser Projector Digital 3D Mapping Beamer

LU8500 Laser Projector

Main features

- Ultra HD resolution, WUXGA 1920 * 1200 pixels, native resolution

HSG color adjustment

- Super dynamic contrast

- Effective dust protection technology

- New laser light source, eye protection ring

- 3D connection

Twin turbo cooling system

120Hz high frame rate screen refresh

-HDbaseT

Product details 

Main Spec Projector Type DLP®Chip×1,DLP Display
Chip Size 0.67''
Native Resolution 1920×1200
Brightness 15,000 Lumens
Uniformity*2 90%
Contrast*2 12000:1
Aspect Ratio 16:10:Native / 4:3 Compatible
Light Source Type RgBL Laser Technology
Life Standard :20.000 Stunden Eco-Modus:25000hours
projector lens Projector Lens A06: 1.22-1.53:1(STD) /A13 2.90-5.50:1/A1 0.57:1
Throw Ratio (0.36~5.50)
Keystone Correction H ±20°
V ±20°
Projection Method Ceiling,Front,Rear
Input DVI-Dx1
HDMI 1.4(SupportHDCP*3)x1
15-pin Mini-Dsubx1
HDbaseT*4x1
Wired Remote x1 3.5mm
RJ45×1(LAN Control)
RS232(D-sub 9pin)x1
miniUSBx1
USB-A x1
Output 15-pin Mini-Dsubx1
HDMI 1.4(Support HDCP*3) OUTx1
3D-Sync x1
Input power (voltage and frequency) 100-240V AC±10%,50/60Hz
Power Consumption Normal:770W,ECO:395W
Case Material Molded Plastic
Standby power consumption <0.5W
Dimension 484mm(W)×519mm(D)×181mm(H)
Net Weight about 25kg
Noice Normal:35dB ECO:33dB
Working Temperature*5 High Altitude 0m-2500m(>1500m Using High Altitude Mode)
Temperature 5-40℃,
Humidity 10%-85%
Accessories AAA batteries x 2, remote control x 1, power cord x 1, VGA cable x 1, CD-ROM (user manual) x 1, quick installation manual, warranty card, lens cap
Comments:
1. The optical output data value is measured at the center of the projected image.
The measurement method is based on the international standard ISO / IEC 21118: 2012, and the data values are averages.
2. ISO21118 standard, the data value is the average value
3. HDCP / HDCP (High Bandwidth Digital Content Protection)
4.HDbaseT.
5. If using the projector at high altitude, the ambient temperature exceeds 35 degrees Celsius;
The service life of optics may be reduced, it is advisable to keep the temperature as low as possible.

yp3qgtivx5g.jpg

리뷰 추가하기

이메일 주소는 공개되지 않습니다. 필수 항목은 *로 표시됩니다

리뷰를 작성하려면 로그인하세요!

사진 업로드

아직 리뷰가 없습니다.

장바구니
본 사이트에서 쿠키 사용을 허용하시면 보다 쾌적한 이용 환경을 경험하실 수 있습니다. 쿠키 정책