10500 lumens DLP Short Throw Laser Projector Digital 3D Mapping Beamer
10500 lumens DLP Short Throw Laser Projector Digital 3D Mapping Beamer
10500 lumens DLP Short Throw Laser Projector Digital 3D Mapping Beamer
10500 lumens DLP Short Throw Laser Projector Digital 3D Mapping Beamer
10500 lumens DLP Short Throw Laser Projector Digital 3D Mapping Beamer
2023
(0)

10500 lumens DLP Short Throw Laser Projector Digital 3D Mapping Beamer

$0.00 $0.00 (In stock)


10500 lumens DLP Short Throw Laser Projector Digital 3D Mapping Beamer

LU8500 Laser Projector

Main features

- Ultra HD resolution, WUXGA 1920 * 1200 pixels, native resolution

HSG color adjustment

- Super dynamic contrast

- Effective dust protection technology

- New laser light source, eye protection ring

- 3D connection

Twin turbo cooling system

120Hz high frame rate screen refresh

-HDbaseT

Product details 

Main Spec Projector Type DLP®Chip×1,DLP Display
Chip Size 0.67''
Native Resolution 1920×1200
Brightness 15,000 Lumens
Uniformity*2 90%
Contrast*2 12000:1
Aspect Ratio 16:10:Native / 4:3 Compatible
Light Source Type RgBL Laser Technology
Life Standard :20000 hours Eco Mode:25000hours
projector lens Projector Lens A06: 1.22-1.53:1(STD) /A13 2.90-5.50:1/A1 0.57:1
Throw Ratio (0.36~5.50)
Keystone Correction H ±20°
V ±20°
Projection Method Ceiling,Front,Rear
Input DVI-Dx1
HDMI 1.4(SupportHDCP*3)x1
15-pin Mini-Dsubx1
HDbaseT*4x1
Wired Remote x1 3.5mm
RJ45×1(LAN Control)
RS232(D-sub 9pin)x1
miniUSBx1
USB-A x1
Output 15-pin Mini-Dsubx1
HDMI 1.4(Support HDCP*3) OUTx1
3D-Sync x1
Input power (voltage and frequency) 100-240V AC±10%,50/60Hz
Power Consumption Normal:770W,ECO:395W
Case Material Molded Plastic
Standby power consumption <0.5W
Dimension 484mm(W)×519mm(D)×181mm(H)
Net Weight about 25kg
Noice Normal:35dB ECO:33dB
Working Temperature*5 High Altitude 0m-2500m(>1500m Using High Altitude Mode)
Temperature 5-40℃,
Humidity 10%-85%
Accessories AAA batteries x 2, remote control x 1, power cord x 1, VGA cable x 1, CD-ROM (user manual) x 1, quick installation manual, warranty card, lens cap
Comments:
1. The optical output data value is measured at the center of the projected image.
The measurement method is based on the international standard ISO / IEC 21118: 2012, and the data values are averages.
2. ISO21118 standard, the data value is the average value
3. HDCP / HDCP (High Bandwidth Digital Content Protection)
4.HDbaseT.
5. If using the projector at high altitude, the ambient temperature exceeds 35 degrees Celsius;
The service life of optics may be reduced, it is advisable to keep the temperature as low as possible.

yp3qgtivx5g.jpg

Add your review

Your email address will not be published. Required fields are marked *

Please login to write review!

Upload photos

Looks like there are no reviews yet.

You may also like

Take it to your cart

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy